dnl	This file is an input file used by the GNU "autoconf" program to
dnl	generate the file "configure", which is run during Tk installation
dnl	to configure the system for the local environment.
AC_INIT(../generic/tk.h)
# SCCS: @(#) configure.in 1.87 97/08/07 10:33:08

TK_VERSION=8.0
TK_MAJOR_VERSION=8
TK_MINOR_VERSION=0
TK_PATCH_LEVEL=""
VERSION=${TK_VERSION}

if test "${prefix}" = "NONE"; then
    prefix=/usr/local
fi
if test "${exec_prefix}" = "NONE"; then
    exec_prefix=$prefix
fi
TK_SRC_DIR=`cd $srcdir/..; pwd`

AC_PROG_RANLIB
AC_ARG_ENABLE(gcc, [  --enable-gcc            allow use of gcc if available],
    [tk_ok=$enableval], [tkl_ok=no])
if test "$tk_ok" = "yes"; then
    AC_PROG_CC
else
    CC=${CC-cc}
AC_SUBST(CC)
fi
AC_C_CROSS
AC_HAVE_HEADERS(unistd.h limits.h)

#--------------------------------------------------------------------
#	See if there was a command-line option for where Tcl is;  if
#	not, assume that its top-level directory is a sibling of ours.
#--------------------------------------------------------------------

AC_ARG_WITH(tcl, [  --with-tcl=DIR          use Tcl 8.0 binaries from DIR],
	TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd ../../tcl8.0/unix; pwd`)
if test ! -d $TCL_BIN_DIR; then
    AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR doesn't exist)
fi
if test ! -f $TCL_BIN_DIR/Makefile; then
    AC_MSG_ERROR(There's no Makefile in $TCL_BIN_DIR;  perhaps you didn't specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?)
fi

#--------------------------------------------------------------------
#	Read in configuration information generated by Tcl for shared
#	libraries, and arrange for it to be substituted into our
#	Makefile.
#--------------------------------------------------------------------

file=$TCL_BIN_DIR/tclConfig.sh
. $file
SHLIB_CFLAGS=$TCL_SHLIB_CFLAGS
SHLIB_LD=$TCL_SHLIB_LD
SHLIB_LD_LIBS=$TCL_SHLIB_LD_LIBS
SHLIB_SUFFIX=$TCL_SHLIB_SUFFIX
SHLIB_VERSION=$TCL_SHLIB_VERSION
DL_LIBS=$TCL_DL_LIBS
LD_FLAGS=$TCL_LD_FLAGS

LIB_RUNTIME_DIR='${LIB_RUNTIME_DIR}'

# If Tcl and Tk are installed in different places, adjust the library
# search path to reflect this.

if test "$TCL_EXEC_PREFIX" != "$exec_prefix"; then
    LIB_RUNTIME_DIR="${LIB_RUNTIME_DIR}:${TCL_EXEC_PREFIX}"
fi

#--------------------------------------------------------------------
#	Supply a substitute for stdlib.h if it doesn't define strtol,
#	strtoul, or strtod (which it doesn't in some versions of SunOS).
#--------------------------------------------------------------------

AC_MSG_CHECKING(stdlib.h)
AC_HEADER_EGREP(strtol, stdlib.h, tk_ok=yes, tk_ok=no)
AC_HEADER_EGREP(strtoul, stdlib.h, , tk_ok=no)
AC_HEADER_EGREP(strtod, stdlib.h, , tk_ok=no)
if test $tk_ok = no; then
    AC_DEFINE(NO_STDLIB_H)
fi
AC_MSG_RESULT($tk_ok)

#--------------------------------------------------------------------
#	Include sys/select.h if it exists and if it supplies things
#	that appear to be useful and aren't already in sys/types.h.
#	This appears to be true only on the RS/6000 under AIX.  Some
#	systems like OSF/1 have a sys/select.h that's of no use, and
#	other systems like SCO UNIX have a sys/select.h that's
#	pernicious.  If "fd_set" isn't defined anywhere then set a
#	special flag.
#--------------------------------------------------------------------

AC_MSG_CHECKING([fd_set and sys/select])
AC_TRY_COMPILE([#include <sys/types.h>],
	[fd_set readMask, writeMask;], tk_ok=yes, tk_ok=no)
if test $tk_ok = no; then
    AC_HEADER_EGREP(fd_mask, sys/select.h, tk_ok=yes)
    if test $tk_ok = yes; then
	AC_DEFINE(HAVE_SYS_SELECT_H)
    fi
fi
AC_MSG_RESULT($tk_ok)
if test $tk_ok = no; then
    AC_DEFINE(NO_FD_SET)
fi

#--------------------------------------------------------------------
#	Check for various typedefs and provide substitutes if
#	they don't exist.
#--------------------------------------------------------------------

AC_MODE_T
AC_PID_T
AC_SIZE_T
AC_UID_T

#------------------------------------------------------------------------------
#       Find out about time handling differences.
#------------------------------------------------------------------------------

AC_CHECK_HEADERS(sys/time.h)
AC_HEADER_TIME

#--------------------------------------------------------------------
#	Locate the X11 header files and the X11 library archive.  Try
#	the ac_path_x macro first, but if it doesn't find the X stuff
#	(e.g. because there's no xmkmf program) then check through
#	a list of possible directories.  Under some conditions the
#	autoconf macro will return an include directory that contains
#	no include files, so double-check its result just to be safe.
#--------------------------------------------------------------------

AC_PATH_X
not_really_there=""
if test "$no_x" = ""; then
    if test "$x_includes" = ""; then
	AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
    else
	if test ! -r $x_includes/X11/Intrinsic.h; then
	    not_really_there="yes"
	fi
    fi
fi
if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
    AC_MSG_CHECKING(for X11 header files)
    XINCLUDES="# no special path needed"
    AC_TRY_CPP([#include <X11/Intrinsic.h>], , XINCLUDES="nope")
    if test "$XINCLUDES" = nope; then
        dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
        for i in $dirs ; do
	    if test -r $i/X11/Intrinsic.h; then
		AC_MSG_RESULT($i)
	        XINCLUDES=" -I$i"
		break
	    fi
        done
    fi
else
    if test "$x_includes" != ""; then
	XINCLUDES=-I$x_includes
    else
	XINCLUDES="# no special path needed"
    fi
fi
if test "$XINCLUDES" = nope; then
    AC_MSG_RESULT(couldn't find any!)
    XINCLUDES="# no include files found"
fi

if test "$no_x" = yes; then
    AC_MSG_CHECKING(for X11 libraries)
    XLIBSW=nope
    dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
    for i in $dirs ; do
	if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then
	    AC_MSG_RESULT($i)
	    XLIBSW="-L$i -lX11"
	    x_libraries="$i"
	    break
	fi
    done
else
    if test "$x_libraries" = ""; then
	XLIBSW=-lX11
    else
	XLIBSW="-L$x_libraries -lX11"
    fi
fi
if test "$XLIBSW" = nope ; then
    AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
fi
if test "$XLIBSW" = nope ; then
    AC_MSG_RESULT(couldn't find any!  Using -lX11.)
    XLIBSW=-lX11
fi

#--------------------------------------------------------------------
#	Various manipulations on the search path used at runtime to
#	find shared libraries:
#	1. If the X library binaries are in a non-standard directory,
#	   add the X library location into that search path.
#	2. On systems such as AIX and Ultrix that use "-L" as the
#	   search path option, colons cannot be used to separate
#	   directories from each other. Change colons to " -L".
#	3. Create two sets of search flags, one for use in cc lines
#	   and the other for when the linker is invoked directly.  In
#	   the second case, '-Wl,' must be stripped off and commas must
#	   be replaced by spaces.
#--------------------------------------------------------------------

if test "x${x_libraries}" != "x"; then
    LIB_RUNTIME_DIR="${LIB_RUNTIME_DIR}:${x_libraries}"
fi
if test "${TCL_LD_SEARCH_FLAGS}" = '-L${LIB_RUNTIME_DIR}'; then
    LIB_RUNTIME_DIR=`echo ${LIB_RUNTIME_DIR} |sed -e 's/:/ -L/g'`
fi
eval "TK_CC_SEARCH_FLAGS=\"$TCL_LD_SEARCH_FLAGS\""
TK_LD_SEARCH_FLAGS=`echo ${TK_CC_SEARCH_FLAGS} |sed -e "s|-Wl,||g" -e "s|,| |g"`

#--------------------------------------------------------------------
#	Check for the existence of various libraries.  The order here
#	is important, so that then end up in the right order in the
#	command line generated by make.  The -lsocket and -lnsl libraries
#	require a couple of special tricks:
#	1. Use "connect" and "accept" to check for -lsocket, and
#	   "gethostbyname" to check for -lnsl.
#	2. Use each function name only once:  can't redo a check because
#	   autoconf caches the results of the last check and won't redo it.
#	3. Use -lnsl and -lsocket only if they supply procedures that
#	   aren't already present in the normal libraries.  This is because
#	   IRIX 5.2 has libraries, but they aren't needed and they're
#	   bogus:  they goof up name resolution if used.
#	4. On some SVR4 systems, can't use -lsocket without -lnsl too.
#	   To get around this problem, check for both libraries together
#	   if -lsocket doesn't work by itself.
#--------------------------------------------------------------------

AC_CHECK_LIB(Xbsd, main, [LIBS="$LIBS -lXbsd"])

tk_checkBoth=0
AC_CHECK_FUNC(connect, tk_checkSocket=0, tk_checkSocket=1)
if test "$tk_checkSocket" = 1; then
    AC_CHECK_LIB(socket, main, LIBS="$LIBS -lsocket", tk_checkBoth=1)
fi
if test "$tk_checkBoth" = 1; then
    tk_oldLibs=$LIBS
    LIBS="$LIBS -lsocket -lnsl"
    AC_CHECK_FUNC(accept, tk_checkNsl=0, [LIBS=$tk_oldLibs])
fi
AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(nsl, main, [LIBS="$LIBS -lnsl"]))

#--------------------------------------------------------------------
# One more check related to the X libraries.  The standard releases
# of Ultrix don't support the "xauth" mechanism, so send won't work
# unless TK_NO_SECURITY is defined.  However, there are usually copies
# of the MIT X server available as well, which do support xauth.
# Check for the MIT stuff and use it if it exists.
#
# Note: can't use ac_check_lib macro (at least, not in Autoconf 2.1)
# because it can't deal with the "-" in the library name.
#--------------------------------------------------------------------

if test -d /usr/include/mit ; then
    AC_MSG_CHECKING([MIT X libraries])
    tk_oldCFlags=$CFLAGS
    CFLAGS="$CFLAGS -I/usr/include/mit"
    tk_oldLibs=$LIBS
    LIBS="$LIBS -lX11-mit"
    AC_TRY_LINK([
	#include <X11/Xlib.h>
    ], [
	XOpenDisplay(0);
    ], [
	AC_MSG_RESULT(yes)
	XLIBSW="-lX11-mit"
	XINCLUDES="-I/usr/include/mit"
    ], AC_MSG_RESULT(no))
    CFLAGS=$tk_oldCFlags
    LIBS=$tk_oldLibs
fi

#--------------------------------------------------------------------
#	On a few very rare systems, all of the libm.a stuff is
#	already in libc.a.  Set compiler flags accordingly.
#	Also, Linux requires the "ieee" library for math to
#	work right (and it must appear before "-lm").
#--------------------------------------------------------------------

MATH_LIBS=""
AC_CHECK_FUNC(sin, , MATH_LIBS="-lm")
AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])

#--------------------------------------------------------------------
#	If this system doesn't have a memmove procedure, use memcpy
#	instead.
#--------------------------------------------------------------------

AC_CHECK_FUNC(memmove, , [AC_DEFINE(memmove, memcpy)])

#--------------------------------------------------------------------
#	Figure out whether "char" is unsigned.  If so, set a
#	#define for __CHAR_UNSIGNED__.
#--------------------------------------------------------------------

AC_C_CHAR_UNSIGNED

#--------------------------------------------------------------------
#	Under Solaris 2.4, strtod returns the wrong value for the
#	terminating character under some conditions.  Check for this
#	and if the problem exists use a substitute procedure
#	"fixstrtod" (provided by Tcl) that corrects the error.
#--------------------------------------------------------------------

AC_CHECK_FUNC(strtod, tk_strtod=1, tk_strtod=0)
if test "$tk_strtod" = 1; then
    AC_MSG_CHECKING([for Solaris 2.4 strtod bug])
    AC_TRY_RUN([
	extern double strtod();
	int main()
	{
	    char *string = "NaN";
	    char *term;
	    strtod(string, &term);
	    if ((term != string) && (term[-1] == 0)) {
		exit(1);
	    }
	    exit(0);
	}], tk_ok=1, tk_ok=0, tk_ok=0)
    if test "$tk_ok" = 1; then
	AC_MSG_RESULT(ok)
    else
	AC_MSG_RESULT(buggy)
	AC_DEFINE(strtod, fixstrtod)
    fi
fi

#--------------------------------------------------------------------
#	The statements below define a collection of symbols related to
#	building libtk as a shared library instead of a static library.
#--------------------------------------------------------------------

AC_ARG_ENABLE(shared,
    [  --enable-shared         build libtk as a shared library],
    [ok=$enableval], [ok=no])
if test "$ok" = "yes" -a "${SHLIB_SUFFIX}" != ""; then
    TK_SHARED_BUILD=1
    TK_SHLIB_CFLAGS="${SHLIB_CFLAGS}"
    eval "TK_LIB_FILE=libtk${TCL_SHARED_LIB_SUFFIX}"
    MAKE_LIB="\${SHLIB_LD} -o ${TK_LIB_FILE} \${OBJS} \$(TK_LD_SEARCH_FLAGS) ${SHLIB_LD_LIBS}"
    RANLIB=":"
else
    TK_SHARED_BUILD=0
    TK_SHLIB_CFLAGS=""
    eval "TK_LIB_FILE=libtk${TCL_UNSHARED_LIB_SUFFIX}"
    MAKE_LIB="ar cr ${TK_LIB_FILE} \${OBJS}"
fi

# Note:  in the following variable, it's important to use the absolute
# path name of the Tcl directory rather than "..":  this is because
# AIX remembers this path and will attempt to use it at run-time to look
# up the Tcl library.

if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
    TK_BUILD_LIB_SPEC="-L`pwd` -ltk${VERSION}"
    TK_LIB_SPEC="-L${exec_prefix}/lib -ltk${VERSION}"
else
    TK_BUILD_LIB_SPEC="-L`pwd` -ltk`echo ${VERSION} | tr -d .`"
    TK_LIB_SPEC="-L${exec_prefix}/lib -ltk`echo ${VERSION} | tr -d .`"
fi

AC_SUBST(DL_LIBS)
AC_SUBST(LD_FLAGS)
AC_SUBST(MATH_LIBS)
AC_SUBST(MAKE_LIB)
AC_SUBST(SHLIB_CFLAGS)
AC_SUBST(SHLIB_LD)
AC_SUBST(SHLIB_LD_LIBS)
AC_SUBST(SHLIB_SUFFIX)
AC_SUBST(SHLIB_VERSION)
AC_SUBST(TCL_BIN_DIR)
AC_SUBST(TCL_BUILD_LIB_SPEC)
AC_SUBST(TCL_SRC_DIR)
AC_SUBST(TCL_VERSION)
AC_SUBST(TK_BUILD_LIB_SPEC)
AC_SUBST(TK_CC_SEARCH_FLAGS)
AC_SUBST(TK_LD_SEARCH_FLAGS)
AC_SUBST(TK_LIB_FILE)
AC_SUBST(TK_LIB_SPEC)
AC_SUBST(TK_MAJOR_VERSION)
AC_SUBST(TK_MINOR_VERSION)
AC_SUBST(TK_PATCH_LEVEL)
AC_SUBST(TK_SHLIB_CFLAGS)
AC_SUBST(TK_SRC_DIR)
AC_SUBST(TK_VERSION)
AC_SUBST(XINCLUDES)
AC_SUBST(XLIBSW)
AC_SUBST(TK_SHARED_BUILD)

AC_OUTPUT(Makefile tkConfig.sh)
